ACT SFP+ LR transceiver coded for Dell SFP-10G-LR
TR0044
Leverancier: Op voorraad
8716065492811
Omschrijving:
- Coded for SFP-10G-LR
- Speed 10Gbps, suited for singlemode cable
- DDM support for monitoring SFP+ module
| Coded for | Dell |
| Media | Singlemode |
| Network protocol | 10 Gigabit Ethernet |
| Max. distance | 10000 m |
| Connector type | LC |
| Number of fibers | 2 |
| Wavelength Rx | 1310 nm |
| Wavelength Tx | 1310 nm |
| Min. working temperature | 0 °C |
| Max.working temperature | 70 °C |
The 3 advantages of SFP+ modules
The 3 biggest advantages of using SFP+ fiber modules are:
1. Standardization
2. Flexibility
3. Continuity
1. SFP+ modules are the standard for fiber optic communication
Manufacturers of network equipment support the SFP, SFP+ and QSFP standards. SFP+ modules are used in different devices such as switches, routers, firewalls, servers and storage devices. These devices are equipped with a port where an SFP+ module can be plugged in. The abbreviation SFP+ stands for Small Form Factor Pluggable and the + indicates that it is for 10Gbps speeds.
The standard for the use of SFP+ modules was established in cooperation with the various manufacturers. This standard is therefore called an MSA, which stands for Multi-Source Agreement.
2. SFP+ modules ensure maximum flexibility in a fiber optic network
A fiber optic cable is connected to an SFP+ module, which is plugged into the switch. The SFP+ module serves as an interface between the fiber optic cable and the connected equipment. This ultimately ensures maximum flexibility, as the SFP+ can be exchanged without having to exchange or replace the equipment in question.
Situations where only the SFP+ module needs to be exchanged, rather than the equipment:
- Transition to a network with a different type of fiber; for example, from single-mode to multimode.
- Changing distances: for example, from 100 meters to 80 kilometers.
- Change to another speed; for example, if the speed of the switch changes from 1G to 10G.
- Different type of fiber optic connector; for example, if instead of an LC, an SC connector is placed on the cabling.
3. Continuity in the network by using hot swappable optics
In case of changes in fiber type, distance, speed and connector, the SFP+ module is replaced. An important advantage is that the equipment does not have to be switched off or restarted when the SFP+ modules are installed, which ensures excellent network continuity. Keeping equipment operational while placing and/or replacing fiber optic (SFP+) modules is called "Hot swappable".
Meer informatie:
 | Datasheet |
