PATCH PRO FLEX CAT 7 Kabel PUR/Gummi, RAL9005, UV best., 100m

Cat.7 patch cable - exceeds the requirements of ISO/IEC 11801, IEC 61156-6, EN 50173-1 and EN 50288 . Application area: Data cable for studio application, Video-Ethernet, IEEE 802.3, 10Base-T, 100Base-T, 1000Base-T, IEEE 802.5 16 MB, ISDN, FDDI, ATM. Suitable for outdoor (UV resistant) but not for direct burial. Suitable for constant movements.

Category:    7
AWG cross section:    26/7
Wire insulation:    Foam-Skin-PE
Wire marking:    Color
Bending radius (dynamic):    8 x AD
Bending radius (static):    4 x AD
Flame retardant:    no
Halogen-free according to EN 50267-2-2:    No
Halogen-free according to EN 60754-1/2:    No
Installation standard:    EN50174
Cable:    IEC61156-6
Cable structure:    S/FTP
Capacitance to earth:    nominal 43 nF/km
Runtime difference:    max. 10ns/100m
Leader Class:    Kl.2 = stranded
Conductor material:    Cu, bare
Conductor nominal cross-section:    0.14mm²
Sheath material:    Polyurethane (PUR)
Max. frequency:    1000MHz
NVP value:    75%
PoE:    according to IEEE802.3af PoE
according to IEEE802.3at PoE+
according to IEEE802.3bt 4PPoE
Low smoke:    No
Low smoke according to EN 61034-2:    No
Shield over stranding element:    film
Shield over stranding:    Braid
Loop resistance:    max. 250 Ohm/km
Transfer impedance at 1MHz:    25 mOhm/m
Transfer impedance at 10MHz:    25 mOhm/m
UV resistant:    Yes
Cabling standards:    EN 50173
EN 50288-4-2
ISO/IEC 11801
Stranding element:    Couples
Characteristic impedance:    100 ± 5 Ohm
Resistance asymmetry:    2%
Permissible external cable temperature during assembly/handling:    0 – 50 °C
Permissible cable external temperature after installation without vibration:    -20 – 60 °C
Transmission standards:    IEEE 802.3 10Mbit to 10Gbit